Picture comes and goes
Ok so This is the plasma that likes to go pop and go black after the warranty expires, so after a lot of research I decided to change the YSUS and ZSUS boards witch now I do have a picture again, problem is the screen now comes on then fades off back and forth and when it is on for it's quick little time the picture is also faint. :-/ should I first double check my connections / cables? Thanks
Televison & Video - Zenith - Z50PX2D 50 in. Plasma HDTV
Answers & Comments
Have you double checked all your connections? Yes I would say that it is definitely possible. If you have any other questions let me know.
Thanks,
Lee
To reset the unit you need to unplug the unit from the power and all cables then wait 30 minutes and redo and plug it back ,if face the same problem try in a different power unit and unit...
Good luck...
Hello Can you see my Comment
GOOD LUCK trying to see my comment
Hello Do you still need my additional help?
Make sure that there is no Magnetic feild around the plasma.
The magnetic tipped screw driver wont hamper anything
By Magnetic field i mean there should not be any gadget near the plasma which contains a heavy Magnet. It may continuously create a magnetic field which will surely let the picture to fade off.
Please check the connections and cables..also try a reset of the system...