Pilot will stay lit but will go out when unit is turned to low
The pilot light will start just fine and stay running. When heater is turned to low most of the time the unit will go out including the pilot. Have changed the regulator and have a new 5 gal gas bottle because seems the unit is getting no gas. Hooked up an old bathroom heater to line and workds great so tank and regulator seem to be in workin order.
Heating & Cooling - Dyna-Glo - D-E36 Infra-Red Wall Mounted Panel Heater
Answers & Comments
Is the pressure regulator right for the type of gas your using...? i had the same problem.i found out that my regulator was for both lp and nat.gas.i also found out there is a small nylon pin underneath the brass cap on top of the regulator.i unscrewed the cap and the fitting was set for lp.and i was using nat. gas.i just pulled the nylon pin out,flipped it around and replaced the cap...works fine now.if your regulator is like mine the nylon pin is maked LP on one end and NAT. on the other.might be worth a try