Planar pdp42bk problem
Hello, i have a planar pdp42bk with problems. When i push the main power switch, the standby light comes on red (never green) and then just turns off 1 second later. The green light on the power supply board also comes on and shuts off at the same time. Any idea what the solution may be?
Also, are C95 and C96 supposed to have caps installed because there are none in those two places on my board and it seems as if they were removed.
Thanks in advance, my email address is [email protected]
~Alex
Also, are C95 and C96 supposed to have caps installed because there are none in those two places on my board and it seems as if they were removed.
Thanks in advance, my email address is [email protected]
~Alex
Televison & Video - Planar - PDP-42BK 42 in. Plasma HDTV
Answers & Comments
Change the c97,c19 and c16 caps below is where I got mines.
Got it from a site called digi-key.com their phone # is 1800-344-4539. The part #s are EF6225-ND you need 1of these, and E6105-ND you need 2 of these, the cost is $16 for all. Let me know how it went.