Models with touch panel: Press Menu, Black Start, Up Arrow four times.
Models with touch panel: Press Menu, Black Start, Scan key four times.
Models with numerical keypad: Press Menu, *, 2,8,6,4 within 5 sec
2. Press the 8 and 0 keys in this order.
3. Press the Black Start key repeatedly until the Purge count appears on the LCD. Press the 2, 7, 8, and 3 keys, in this order, to reset the purge count.
4. Press the Black Start key repeatedly until the Flushing count appears on the LCD. Press the 2, 7, 8, and 3 keys, in this order, to reset the flushing count.
5. Press the Stop/Exit key to return to the initial stage of the maintenance mode.
6. Press the 9 key twice to exit from Maintenance mode.
Answers & Comments
Reset Ink Absorber Full / Machine error 46
1. Enter Maintenance mode
Models with touch panel: Press Menu, Black Start, Up Arrow four times.
Models with touch panel: Press Menu, Black Start, Scan key four times.
Models with numerical keypad: Press Menu, *, 2,8,6,4 within 5 sec
2. Press the 8 and 0 keys in this order.
3. Press the Black Start key repeatedly until the Purge count appears on the LCD. Press the 2, 7, 8, and 3 keys, in this order, to reset the purge count.
4. Press the Black Start key repeatedly until the Flushing count appears on the LCD. Press the 2, 7, 8, and 3 keys, in this order, to reset the flushing count.
5. Press the Stop/Exit key to return to the initial stage of the maintenance mode.
6. Press the 9 key twice to exit from Maintenance mode.