The 133 fatal errorC headafter turning ON the power or when cover is closed, the sensor detects that the unit is missing.1. is an Error message displayed? yesICheck the OED head unit.2 is the LED head properly mounted? noTurn ON power again3 Does the Error take place again? yesReplace the LED head Assy.
If you are in a Windows OS it means that: 133 JOIN or SUBST command can not be used for a drive that already contains readers joints.So uninstall your printer and install it again using the best driver.
Open the top cover. check ubder the LEDs. each one has two sets of cables attached. remove them and put them back again. It should work now.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
The 133 fatal error
C head
after turning ON the power or when cover is closed, the sensor detects that the unit is missing.
1. is an Error message displayed? yes
ICheck the OED head unit.
2 is the LED head properly mounted? no
Turn ON power again
3 Does the Error take place again? yes
Replace the LED head Assy.
If you are in a Windows OS it means that:
133 JOIN or SUBST command can not be used for a drive that already contains readers joints.
So uninstall your printer and install it again using the best driver.
Open the top cover. check ubder the LEDs. each one has two sets of cables attached. remove them and put them back again. It should work now.