PNY GeForce 9500GT 512MB DDR2 PCIE 2.0 blank screen after install
I have Dell Dimension 9150 with ATI Radeon X300se 128MB with Hypermemory installed into PCI-E v1.0 x16. Decided to upgrade to
PNY VCG95512GXEB GeForce 9500 GT 512MB 128-bit GDDR2 PCI Express 2.0 x16. After reboot i got nothing but blank screen and my desktop reported possible video card failure using diagnostic lights on front panel. I can not check if card is faulty (don't have another computer to test it in), or it is just not comatible with my system. Users on other forums indicated that this card even works on Dell OptiPlex models.
Any help would be greatly appreciated.
PNY VCG95512GXEB GeForce 9500 GT 512MB 128-bit GDDR2 PCI Express 2.0 x16. After reboot i got nothing but blank screen and my desktop reported possible video card failure using diagnostic lights on front panel. I can not check if card is faulty (don't have another computer to test it in), or it is just not comatible with my system. Users on other forums indicated that this card even works on Dell OptiPlex models.
Any help would be greatly appreciated.
Computers & Internet - Evga - NVIDIA GeForce 9500GT,, PCI Express Video Card
Answers & Comments
Is the PCI Express Slot a 2.0 x16? that could be the issue not positive those cards will work without that specific slot Also check on the graphics card for a 6Pin plug usually they wont work well with out it hooked up to the power supply the plug should say PCI-Epress 1 or 2 good luck!