Polaroid 37" If they do not have the 10V 1000uF capacitors get the 35V 1000uF. The reason it failed in the first place is because they used the wrong ones. I should have mentioned it the first time. Sorry
Televison & Video - Polaroid - FLM-3734B 37 in. LCD HDTV
Answers & Comments
The reason for the first failure is use of very poor quality or LOW voltage caps.The 35 volt Radio Shack caps will work fine and will give no future trouble.Too low a voltage rating or poor manufacturing leads to leakage and drying out of electrolytic caps.35 volt versus 10 volt is a higher rating and,within reason,will not cause a problem.For technical reasons don't go extremely high(such as 150 volts).This might cause a problem down the line.