Poulon Wildthing 18" Gas Chain Saw
Machine starts and runs well but after a minute or two of running full speed it slows to half throttle. Its not the load, it runs at half throttle when I pull it out. A few pumps on the trigger and it comes back to full speed, but soon slows down again. Seems like its running out of fuel. Any suggestions would be appreciated. **** B
Garden - Poulan - Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Answers & Comments
Some Poulans vent thru a fuel line going from the tank to the carburetor. Some vent thru the cap but eventually the duck bill valve starts leaking fuel. Then I suspect some people change that cap to one without a vent, which causes the problem you are describing.