Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.
Answers & Comments
Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.