Power will not come on, but fuse is good
TV worked fine, I turned it off for the night and I usualy use the remote. this time I pushed the power switch and I think I pressed another switch. the power would not come on. the bottom blue light is on but no raster or sound. I took the cover off and the fuse was good. I am lost, it seem as if there was a code by pushing 2 buttoms at a time. any help would be appricated. john
Televison & Video
Answers & Comments
I dont know about a code but i would check my 5 volt standby power supply voltage ,and depending on tv check all standby voltages with set pluged in only .if stand by voltages is good check for horiz drive at base of driver trans when you press the power button