This is the relevant excerpt from the troubleshooting instructions: Why is my Powerbolt 1000 unit beeping? To determine why your lock is beeping abnormally, please follow these steps:
Take out batteries and unplug powerstrip.
Let it sit for 1 minute, then put the batteries back in and wait another minute.
If it does not beep, the keypad needs to be replaced (17733-1).
If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).
Answers & Comments
This is the relevant excerpt from the troubleshooting instructions:
Why is my Powerbolt 1000 unit beeping?
To determine why your lock is beeping abnormally, please follow these steps:
- Take out batteries and unplug powerstrip.
- Let it sit for 1 minute, then put the batteries back in and wait another minute.
- If it does not beep, the keypad needs to be replaced (17733-1).
- If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).
Here is the link to the complete instructions:http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx
Weiserlock contact information is:
(United States of America) Customer Service Contact Information
Call Us Toll Free: 800-422-4278 (Mon-Fri, 6:00am - 4:30pm PST)
Good luck!