Precor Elliptical EFX 5.23. Getting grinding noise on both forward and backward strides. It appears the aluminum eddy current disk is rubbing intermittently on the electromagnet. All the bolts seem tight so I am not sure why this is intermittently rubbing
There may be a wave washer on the crankshaft that broke - when it breaks, there is too much left to right play in the shaft, so the disk will intermittently rub. Taking it all apart and replacing the washer is tricky - hire a pro.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/russell_1d1c35fa8a5a0be4
Answers & Comments
There may be a wave washer on the crankshaft that broke - when it breaks, there is too much left to right play in the shaft, so the disk will intermittently rub. Taking it all apart and replacing the washer is tricky - hire a pro.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/russell_1d1c35fa8a5a0be4