Print quality I replaced the toner cartridge about 2000 copies ago. In the last 500 copies, I am getting seriously awful ghosting. The machine has done around 32000 copies and I was told the drum would last around 90000 copies. Any suggestions? Do I need a service call as I dont have a service agreement anymore
Answers & Comments
Ghosting can :
1-prints on the fuser roller, check if yes try cleaning it off, wait until it cools off
2-blanking lamps dirty or not working,(deletes image off the drum, before it gets ready to accept a new one)
BL mirror-(new image)
\ /
()
drum
3-Bad drum (although I doubt it this far in the process.)