You didn't give a model but try these, be sure the print wheel is not damaged or has the ribbon or L/O tangled in it, turn the T/W off see if the carrier will move fairly freely if not spray some WD40 on the silver shaft it slides on.DickyO
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
You didn't give a model but try these, be sure the print wheel is not damaged or has the ribbon or L/O tangled in it, turn the T/W off see if the carrier will move fairly freely if not spray some WD40 on the silver shaft it slides on.
DickyO