PRINTER WILL NOT FEED THE DISCS TO THE PRINTING STAGE
My Microboards cd/dvd printer has a problem releasing the discs(they seem to get stuck when dropping) also as the rollers roll the disc towards the print area, the disc stops and cannot be printed. I can still see the back third of the disc where it gets dropped and if i give it a bit of help, it goes through. Can you imagine how frustrating this is to have to push every single disc through 1 at a time. Any help would be gratefully accepted.
I think i have the earliest version of the printer. It's about 4-5 years old
Many thanks
John Stoker
Office Equipment & Supplies - MicroBoards - Print Factory InkJet Printer
Answers & Comments
I´ve had that same "problem" once.In this case the "problem" was with discs.They were thinner than those that I normally use. You could try with different discs.
Jouni
I have some technical document that might help you.Let me know your e-mail so I send them to you.
Jouni Kontulainen
(Juoni)