Problem Hi ! I got problem to log in to my zonet ZSR0104CP. I have try username admin and password admin but it don´t work. someone know the pasword and username? or how I reset my password and username?
Computers & Internet - Zonet - ZSR0104CP (zsr0104cp) Router
If you forgot your password, the best thing is to reset the router to default settings. Disconnect the power adapter from the wall outlet. Press the reset button on the back of the unit, keep holding it and plug in the power adapter back into the wall oulet. It takes about 15 seconds for the ubit to reset. The power LED will turn on in green,initially. Wait for the power LED to turn red. Then release the reset button. Open thw web browser and go to 192.168.1.1 Username is admin and password is admin. Then you can put your settings back in. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Someone must have changed the IP address of your router, because the default is 192.168.1.1. Did you try to type admin as the user name and password?
Also go to start > run. Type in cmd,then ok. When the window opens, type in ipconfig. Let me know what the gateway IP is.
Try to reset again. Try holding the reset a little longer when you plug the power back in.Someone must have changed the IP address of your router, because the default is 192.168.1.1. Did you try to type admin as the user name and password? Also go to start > run. Type in cmd,then ok. When the window opens, type in ipconfig. Let me know what the gateway IP is.
Try to reset again. Try holding the reset a little longer when you plug the power back in.
Answers & Comments
Point your browser to -> 192.168.10.1
default user and pass is:
user: guest
pass: guest
(i have tried posting this solution 5 times now and it never shows up!)
If you forgot your password, the best thing is to reset the router to default settings.
Disconnect the power adapter from the wall outlet. Press the reset button on the back of the unit, keep holding it and plug in the power adapter back into the wall oulet.
It takes about 15 seconds for the ubit to reset. The power LED will turn on in green,initially. Wait for the power LED to turn red. Then release the reset button.
Open thw web browser and go to 192.168.1.1 Username is admin and password is admin. Then you can put your settings back in.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Someone must have changed the IP address of your router, because the default is 192.168.1.1. Did you try to type admin as the user name and password?
Also go to start > run. Type in cmd,then ok. When the window opens, type in ipconfig. Let me know what the gateway IP is.
Try to reset again. Try holding the reset a little longer when you plug the power back in.
Is this a new router or did it belong to some previously?
I am researching another solution.