You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.
1.Turn ignition to the RUN position (as far as you can go without starting the engine). Wait for chimes to stop.
2.Using original programmed remote, press and hold the UNLOCK button on the remote for between 5 and 10 seconds.
3.While holding UNLOCK button, and before 10 seconds passes, press and release the PANIC button. A chime will sound to indicate that the transmitter programming mode has been entered.
4.Within 30 seconds of the chime, press a button on all remotes to be programmed into the system including any previously programmed remotes, a chime will sound after each remote has been programmed.
5.Turn the ignition OFF to exit the transmitter programming mode.
Answers & Comments
You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.
1. Turn ignition to the RUN position (as far as you can go without starting the engine).
Wait for chimes to stop.
2. Using original programmed remote, press and hold the UNLOCK button on the
remote for between 5 and 10 seconds.
3. While holding UNLOCK button, and before 10 seconds passes, press and release
the PANIC button. A chime will sound to indicate that the transmitter programming
mode has been entered.
4. Within 30 seconds of the chime, press a button on all remotes to be programmed
into the system including any previously programmed remotes, a chime will
sound after each remote has been programmed.
5. Turn the ignition OFF to exit the transmitter programming mode.
6. Test Remotes