ProView PL926WBi Hello, I've got a ProView PL926WBi and pretty sure I need either a new inverter board or parts to fix mine. Both fuses are good and +14 and +5 volts coming out of the power supply board are good. Nothing comes out of the HV connectors. Tubes look ok and everything worked fine until one day came home to a dark screen which would not light up. I figured Windows was acting up so I powered all down for a few minutes and restarted. I noticed the monitor light blinking for a bit while the computer booted up, then the monitor looked as if it just shut off. Windows continued to boot, I'd expect fine, but nothing on the monitor at all. Any help would be appreciated. This is not an expensive monitor, so I really can live without it, but as I like fixing things, I'm giving it a shot. Thanks. -Rodger
Computers & Internet - Proview - PL926WBi 19" LCD Monitor
ProView PL926WBi this trouble maybe power supply or inverter boards is defective. first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts if you have any question,please let us know email:[email protected],we sincerely hope we can help you! you can also check this boards whether suit you:
200 000 170DTLBMH PI 190DTLB Proview 899 AB0 220DTLB PCTH Power Supply...
Answers & Comments
ProView PL926WBi
this trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:[email protected],we sincerely hope we can help you!
you can also check this boards whether suit you:
200 000 170DTLBMH PI 190DTLB Proview 899 AB0 220DTLB PCTH Power Supply...
Bad capacitors on the board, replace these and the inverters should get there power.