If you are just needing to do this to change the belt see what size socket it takes. Could be standard or metric. You will then need a good ratchet and/or small cheater pipe to go over the handle of the ratchet since the tensioner is very tight. Go towards the center of the engine in direction or away from the pulley. Hope this helps. You only need to go so far now and now completely around.
Answers & Comments
If you are just needing to do this to change the belt see what size socket it takes. Could be standard or metric. You will then need a good ratchet and/or small cheater pipe to go over the handle of the ratchet since the tensioner is very tight. Go towards the center of the engine in direction or away from the pulley. Hope this helps. You only need to go so far now and now completely around.