Radio gets extremely hot, 06’ Hyundai Santa Fe rewire radio. Ground is black. Acc is red and b+ is a thicker light brown. I think everything I hooked up the right way, it was getting just extremely hot once I plugged in connector to the radio, after some tinkering it now only gets extremely hot once I plug it in and turn the key to on.. and o mean burn you got. I’m in the process of making a bigger ground wire cause I read that might be the issue... anyone else know the correct radio wire diagram for 06 HYUNDAI Santa Fe where the main wire, Green-ground light brown Light brown with black on it - Acc+ lighter thicker brown - B+
Cars & Trucks - Hyundai
Answers & Comments
Http://www.modifiedlife.com/2006-hyundai-santa-fe-car-stereo-radio-wiring-diagram
This is what my diagram says.
Green= Ground
Brown= Full time power
Brown/Black= Ignition/accessory Power
Blue/Orange= Amp
Pink= Interior lights
Brown/Black= Interior lights
Black/Org= Amp
The radio shouldn't be getting that hot, try this. Connect only the Green, Brown and Brown/Black wires then turn the switch on and if the radio heats up there's a problem with the radio if not continue to connect wires one at a time and watch for a heavy spark I think the amp is heating up due to a cross circuit connection going to the speakers or the external amp.
I hope this helps. Take care. If I can be of any more help use comment and it will show up in my email.