See Tina's answer above. Also..... Once a year or more frequent in steady use, the 'C' clip in the drive head should be removed along with the gear guts and a small amount of very thin air tool grease (not oil), should be wiped onto all the parts and re-assembled. This procedure is better done by professional tool repair centre's.
Squeeze 4-5 drops of pneumatic tool oil into the air fitting daily. If you use the tool all day, repeat the process half-way through the day. If you don't use the tool very often, just oil it when the tool is used.
Answers & Comments
See Tina's answer above. Also.....
Once a year or more frequent in steady use, the 'C' clip in the drive head should be removed along with the gear guts and a small amount of very thin air tool grease (not oil), should be wiped onto all the parts and re-assembled. This procedure is better done by professional tool repair centre's.
Squeeze 4-5 drops of pneumatic tool oil into the air fitting daily. If you use the tool all day, repeat the process half-way through the day. If you don't use the tool very often, just oil it when the tool is used.