Raypak r266a residental pool heater sensor code SNS ,I removed the temp sensor and it appears like its coroded and has a small split in the outer case of the sensor its self, if i unplug it at the PC board and plug it back in it appears to try and read the temp then faults out? any suggestions? Thanks
Pool & Spa - Raypak - RP2100 DIGITAL POOL HEATER R206 PROPANE GAS POOL HEATER
SNS means Sensor failure, Water temp. below 36°F or above 110°F
You will need to replace the temperature sensor. Here is the sensor and PC board: http://www.inyopools.com/Products/04000000029300.htm?CS_010=29300&CS_003=905765
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
I have not found the temp. sensor by itself. Contact Raypak for the part here:http://www.raypak.com/emailpool.htm or call 805-278-5300I have not found the temp. sensor by itself. Contact Raypak for the part here: http://www.raypak.com/emailpool.htm or call 805-278-5300
Answers & Comments
SNS means Sensor failure, Water temp. below 36°F or above 110°F
You will need to replace the temperature sensor. Here is the sensor and PC board:
http://www.inyopools.com/Products/04000000029300.htm?CS_010=29300&CS_003=905765
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
I have not found the temp. sensor by itself. Contact Raypak for the part here:http://www.raypak.com/emailpool.htm or call 805-278-5300
Thank you for choosing Fixya.com!