RC30 Rear Wheel Spindle
Just Bought a second hand CCM R30 (2003) and i have have noticed that the rear wheel spindle (Axle) does come to the same height as the nut. It looks as though it is not in Safety. The rear wheel nut is on the same side as the sprocket. Is this correct & how should this look?
Motorcycles - CCM - RC 30 - 2003 CCM RC 30
Answers & Comments
I presume u mean the thread does not protrude much (if at all) past the nut
How does the nut lock?
split-pin / R clip or cir-clip - it must come through much further
tab / spring-washer - it should be at least flush (level) with the nut
or if it is a Nylock / Aircraft-style locking nut - the spindle should protrude at least 5mm to allow for the thread lead-in
Ride safe
Bike-Doc
Please mark this as very helpful (if it has been!!)