Hi:

Thank you for your last response to my question concerning the FL231 fuse that keeps blowing.

Two questions I have for you:

1) Is the "Convergence Power Supply Board" the same board that the FL231 fuse and the flyback transformer is located on?

2) My chassis is actually an ITC222A chassis, and the board I *think* you are referring to with the FL231 fuse is actually shaped differently and looks a bit different that the link you provide me at http://servicemanuals.vstore.ca/. So, I'm wondering if there is a different place I can obtain replacement boards for the ITC222A chassis.

Also - do you know of a way to get ahold of the service manuals and/or schematics for these boards?

Thanks for any help - you've been really helpful so far.

Don

Slinteriors
Rank: Guru
Rating: 88%, 2335 votes
The problem is related to the Convergence power supply board, which is shorting out and blowing fuse FL231. You will need a new Convergence power supply board to repair the Issue with the ITC222 chassis. You can get a replacement board at the following link.
http://servicemanuals.vstore.ca/

Televison & Video - RCA - R52WH73 Projection Television