RECORDING GUITAR USING AUDIOPHILE FIREWIRE AND GUITAR RIG 3
Hi, is it possible to record guitars using RCA ins? Do I need another interface with 1/4 jack ins or something else? I used to have line 6 pod and was using its spdif out to communicate with the sound card spdif in. Everything worked flawlessly for me then. Now I would like to try guitar rig 3. I want to use the sound card as the interface and plug my guitar directly into it.
Any tips?
Many thanks
****
Any tips?
Many thanks
****
Computers & Internet - M-Audio - Audiophile External Sound System
Answers & Comments
I've ran the audio in on my sound card to my mixer and had the guitar on the mic in. I've also ran the line in to a small cracker amp. Keep it turned down. If I would directly connect it use an adaptor. I haven't tried using a 1/4 to 1/8 adapter and directly connected to it as I wanted to control the tone. I don't see why it wouldn't work. Keep everything muted and turned all the way down when you first connect it. Then start raising volumes slowly I will try and report back As far as spdif you're just recording analog to digital conversion. I get more realisitc sound just keeping it analog til it hits my line in. Have a quality sound card. Not some walmart special. I use Adobe Audition 1.5 to multichannel record.