You need to empty the water in the tanks, there are two one is external the other is internal if you do not have the external tank attached do so and with the unit of, then turn the unit on and put it in cool mode and watch for the water to drain if this does not work emty the water from the scre holes with the unit unplugged and drain it outside you will need leverage as it will need a slight tilt to do so. Hope that helps..
If you have the external tanks already installed, like recommended, shouldn't it pump in there automatically? Ours never has pumped into the external tank and now I have to empty the internal tank continuously. Is there a pump that isn't functioning?If you have the external tanks already installed, like recommended, shouldn't it pump in there automatically? Ours never has pumped into the external tank and now I have to empty the internal tank continuously. Is there a pump that isn't functioning?
Since the fitting to my external tank is broken, can I run the unit using only the internal bucket? The sears parts manual doesn't even show the external tank.
Answers & Comments
You need to empty the water in the tanks, there are two one is external the other is internal if you do not have the external tank attached do so and with the unit of, then turn the unit on and put it in cool mode and watch for the water to drain if this does not work emty the water from the scre holes with the unit unplugged and drain it outside you will need leverage as it will need a slight tilt to do so. Hope that helps..
If you have the external tanks already installed, like recommended, shouldn't it pump in there automatically? Ours never has pumped into the external tank and now I have to empty the internal tank continuously. Is there a pump that isn't functioning?
Since the fitting to my external tank is broken, can I run the unit using only the internal bucket? The sears parts manual doesn't even show the external tank.