You will find the answer here : http://www.scotts.com/smg/learn/infoHowToArticle.jsp?detailId=13400022 Mine locks with a part clockwise turn but to refill I open by turning counterclockwise. It's very tight.
use a large pipe wrench and it opens easily, of course the wrench will just barely fit the ring but it is enough to open the top without breaking the plunger, good luck!use a large pipe wrench and it opens easily, of course the wrench will just barely fit the ring but it is enough to open the top without breaking the plunger, good luck!
After trying for long time this works for me. Let all the air out. Remove the blue cover, (snap it off). I use my letter opener to pry around the cap a little and some air came out. When I turn the cap counter clockwise it opened easily. Try this, don't give up. Enaida Latalladi
Answers & Comments
You will find the answer here : http://www.scotts.com/smg/learn/infoHowToArticle.jsp?detailId=13400022 Mine locks with a part clockwise turn but to refill I open by turning counterclockwise. It's very tight.
use a large pipe wrench and it opens easily, of course the wrench will just barely fit the ring but it is enough to open the top without breaking the plunger, good luck!
After trying for long time this works for me. Let all the air out. Remove the blue cover, (snap it off). I use my letter opener to pry around the cap a little and some air came out. When I turn the cap counter clockwise it opened easily. Try this, don't give up.
Enaida Latalladi