Regeneration is nightly as oppsoed to the prrprogrammed 14 days
Hi,
I ahve an Gold Series Water softner.
It is regenerating on a nightly basis as opposed to the programmed 14 days. The screen that shows the days since last regeneration says "DAYS00"
How can I resolve this?
Thanks
I ahve an Gold Series Water softner.
It is regenerating on a nightly basis as opposed to the programmed 14 days. The screen that shows the days since last regeneration says "DAYS00"
How can I resolve this?
Thanks
Measuring Tools & Sensors - Culligan - Sediment Water Filter
Answers & Comments
"DAYS00" indicates it is set to run every day. You may have lost power and it reset to factory settings. If the Gold series softener you have is the Aqua Sensor model (this is a probe in the resin tank that senses a change in the water chemistry and sends a signal to regenerate) the probe can get coated with iron and will either send NO signal or a Constant signal which will make it regen every night.
Usually a Gold series softener is either set up as metered or aqua sensor. There is an option for an override (such as 14 days) or it can be set up as a time clock model. Unplug the softener for 2 minutes and plug back in, re-program the controls to "DAY14". Make sure what the system is suppose to be set up as, Meter, AS, Time Clock.
Here is a link to Culligan for the Gold manual.
http://www.culligan.com/en/service-and-maintenance/customer-support/owners-guide/
RJ