Reinstall of a hunter model 22450
I am moving a hunter 22450 that is presently hung by a hook screwed into the ceiling joist. the location i am moving it to has a fan rated ceiling box that is not mounted directly to the joist but is between 2 joists. it is a heavy duty fan box but i can't see how to install this kind of J hook to the box. any ideas would be appreciated.
thanks
Dryers - Hunter - Fan Company 5/1/1 Programmable Thermostat
Answers & Comments
Can you put a 2X4 between the joists and bolt the fox to that?
I was getting the pic this was a temporary install ...
There is a box that will fit through a 4 inch hole that you should consider ... it works like a screen door brace (but much heavier) you put the 'bolt' through the hole and tighten it up against the ceiling joists. Then, you put the screw on bracket over and under the bolt ... then you can fasten the box to the bracket. I could do chin-ups on this box ... if I could do chin-ups. I did hang from it. It will definitely suppport a fan if it will hold my 205 frame. Expect to pay about $14.00 and find it at good hardware stores or at the big box place.