Reinstating Yaesu 707 transceiver to original 100watt output
I recently purchased a old 2nd hand Yaesu 707 tranceiver in very good condition but found that it had been derated from original 100watt output to 30watt output and was wondering how to reinstate it. I have an Owners manual but it is not mentioned in that. Any help appreciated many thanks
ginder
ginder
Radio Communications - Yaesu - POWEREX MH-C500Y Charger for FRS radios (VXF-10)
Answers & Comments
Check the resistor values around the finals and also around the stage that drives the finals and see if they differ from the schematic values.