There are screws that hold the housing for the belts on. Take all these screws out and the housing should come off. Remove the old belt You have to take your vac model number and make and ask either at a vac store or sometimes a hardware store also carries them To replace you have to take the brush off and you should clean and lightly oil the ends and replace with the belt on then put housing back in place. Replacing all the screws.Don't try repairing with it plugged in.
Answers & Comments
There are screws that hold the housing for the belts on. Take all these screws out and the housing should come off. Remove the old belt You have to take your vac model number and make and ask either at a vac store or sometimes a hardware store also carries them
To replace you have to take the brush off and you should clean and lightly oil the ends and replace with the belt on then put housing back in place. Replacing all the screws.Don't try repairing with it plugged in.