Hi, remove the screw at the rear of the seat. Assuming the bike has the stock seat, lift the rear of the seat clear of the spigot on the fender, pull back towards the back to release the tang at the front of the seat. If the seat strap is still in place, twist the seat and pull it out of the strap. Re-fitment is the reverse order.
Answers & Comments
Hi, remove the screw at the rear of the seat. Assuming the bike has the stock seat, lift the rear of the seat clear of the spigot on the fender, pull back towards the back to release the tang at the front of the seat. If the seat strap is still in place, twist the seat and pull it out of the strap. Re-fitment is the reverse order.