You can ask for a set of printed instructions from autozone. I will say for this job you will need the following size sockets. 10mm 13mm 15mm. for some things a wrench 10mm may work better.you will also need a flat head screwdriver and gloves. For the J-Strap they talk about you can just use a racheting tie-strap... careful you dont need alot of force. its just needed to hold the engine forward. you have to carefully remove the windshield wiper assembly. fully removing it from the van. you also have to lower the windshield wiper fluid container (3x10mm bolts) and 3 bolts to the alternator..
Answers & Comments
You can ask for a set of printed instructions from autozone. I will say for this job you will need the following size sockets. 10mm 13mm 15mm. for some things a wrench 10mm may work better.you will also need a flat head screwdriver and gloves. For the J-Strap they talk about you can just use a racheting tie-strap... careful you dont need alot of force. its just needed to hold the engine forward.
you have to carefully remove the windshield wiper assembly. fully removing it from the van. you also have to lower the windshield wiper fluid container (3x10mm bolts) and 3 bolts to the alternator..