Removing password on T30
I have a numberous compaq T30 thin clients connecting to Microsoft 2003 Terminal Servers. I have an automatic logon,
When I am hit the esc key, prior to the automatic logon, the user name and password prompt window appears for the admin logon.
I do not know the admin password, so I am stuck!!
Is their a way to reset the t30 back to factory defaults by booting to a flash image configuration?
Please let me know
thanks
Jim
When I am hit the esc key, prior to the automatic logon, the user name and password prompt window appears for the admin logon.
I do not know the admin password, so I am stuck!!
Is their a way to reset the t30 back to factory defaults by booting to a flash image configuration?
Please let me know
thanks
Jim
Computers & Internet - Compaq - EVO T30 Network Terminal
Answers & Comments
YES.... providing that the hard drive was not completely re-formated before the windows OS was installed.
Usually, manufacturers leave a section of the HD for this so in the event that something goes wrong, you would be abke to revert back to the manufacturer's setup.
Simply follow the following instructions... :
1) remove power from the T30.
2) hold or tap the 'G' key on the keyboard
3) apply power back on T30 while maintaining step 2)
4) turn on T30 via power button while maintaining step 2)
5) T30 should eventually boot up and in factory default settings.
If this doesn't work, repeat process or the T30 was configured to disable the 'G' key. In this case you need to reflash the firmware on the T30.