This can be a problem on contact with the magnetic switch, it could be not touching did not contact each other so you need to put some force to lock it.
Better check the alignment of the switch if it's properly seated and there was no problem with switch.
Answers & Comments
Hi there,
This can be a problem on contact with the magnetic switch, it could be not touching did not contact each other so you need to put some force to lock it.
Better check the alignment of the switch if it's properly seated and there was no problem with switch.
Hope this initial info helps.
Kindly let me know for further clarifications.
This can be a possible cause that can make this kind of problem, a bad contact or a faulty switch.