Replacement KEF Coda III TWEETER Type SP1087
Gentlemen:
herewith I would like you to provide me with advice in regard with replacement of the KEF Coda III TWEETER Type SP1087.
Would you send me feedback which are the best similar tweeters for substitution of the above one?
The original old KEF Coda III TWEETER Type SP1087 has the following data parameters:
Type: to supple dome of 25 mm, liking ferrite
Power nominal: 35 w
Power max: 50 w
Band passing: 3kHz – 20 kHz
Yield: 91 dB
Impedance: 6 Ohms
Diameter spool: 25 mm
Diameter ferrite: 60 mm
Dimensions of the HP: 65 x 90 mm
Depth of the HP: 26 mm
Opening Speaker: 62 x 74 mm
Between horizontal axis: 77 mm
Between vertical axis: 51 mm
Thank you in advance for your feedback.
Kind Regards,
D.Ralchev
herewith I would like you to provide me with advice in regard with replacement of the KEF Coda III TWEETER Type SP1087.
Would you send me feedback which are the best similar tweeters for substitution of the above one?
The original old KEF Coda III TWEETER Type SP1087 has the following data parameters:
Type: to supple dome of 25 mm, liking ferrite
Power nominal: 35 w
Power max: 50 w
Band passing: 3kHz – 20 kHz
Yield: 91 dB
Impedance: 6 Ohms
Diameter spool: 25 mm
Diameter ferrite: 60 mm
Dimensions of the HP: 65 x 90 mm
Depth of the HP: 26 mm
Opening Speaker: 62 x 74 mm
Between horizontal axis: 77 mm
Between vertical axis: 51 mm
Thank you in advance for your feedback.
Kind Regards,
D.Ralchev
Audio Players & Recorders - KEF Audio - Model Three Main / Stereo Speaker
Answers & Comments
Go here and find a nice substitute. Many to choose from and it may be better to purchase a pair of them rather than have mis-matched ones. They should be inexpensive enough for you, as low as $2 up to $480. You just need the size of the mounting hole to find a replacement though.
http://www.parts-express.com/speakers.cfm