Replacing ceiling fixture but wall switch not working
I failed to note how the old wiring was set up when i removed an overhead 3 light fixture (w/dimmer switch) & can't get proper set up so switch works (incl on/off). There are 2 black & 2 white wires twisted which were like that before plus 1 single black & white which may, or may not, have been connected somehow. I've tried several combinations and can get light to work but switch & dimmer don't. Not sure it matters but I currently have 40watt bulbs in.
The single b&w wires are not registering on my circut tester.
Help ! Thanks
Electrical Supplies - Lutron - Maestro 600-Watt Multi-location Dimmer Terracotta...
Answers & Comments
You an probably get all the info you need here: http://www.dimmers.net/maestro.asp
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c