There were 2 directions that I found. Here they are:
With the engine off, turn the ignition switch to "On" without starting the engine.
Within a 10 second interval, push the accelerator pedal all the way down slowly three times within 10 seconds.
Turn the ignition switch to the "LOC" position.
Second one is:
Step 1 Turn the key in your ignition to "ACC." Do not start the engine. Step 2 Press the "Step" button. This button is located on the instrument panel under the display that tells you how many miles until the car needs to have the oil changed again. Step 3 Press the "Reset" button until the display shows "3000 Miles to Service." Turn the key to the "OFF" position and remove it from the ignition. The oil monitoring system has been reset. Hope this solves your issue.
Answers & Comments
There were 2 directions that I found. Here they are:
Step 1 Turn the key in your ignition to "ACC." Do not start the engine.
Step 2 Press the "Step" button. This button is located on the instrument panel under the display that tells you how many miles until the car needs to have the oil changed again.
Step 3 Press the "Reset" button until the display shows "3000 Miles to Service."
Turn the key to the "OFF" position and remove it from the ignition. The oil monitoring system has been reset.
Hope this solves your issue.