Remove batteries and put them back. You will hear a long beep and a short beep. Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode. Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button. Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.
Adding a PIN: Key in master PIN and press UNLOCK button Press and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds. Release 0 button and you are in the Add PIN mode Within 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep. Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.
Answers & Comments
Google
Rona Electronic Deadbolt Lock Instructions:
Default Master Code:123
Resetting Master PIN:
Remove batteries and put them back. You will hear a long beep and a short beep.
Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.
Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.
Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.
Adding a PIN:
Key in master PIN and press UNLOCK button
Press and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.
Release 0 button and you are in the Add PIN mode
Within 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.
Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.
make model resetting lock
https://www.google.com/search?q=resetting+Master+pin+on+rona+Electronic+Deadbolt+lock
..