Resolution Problem with 2 Optiquest Q19WBs and 1 GeForce 8600GT
I have 2 Optiquest Q19wb (Analog/VGA) LCD Monitors, running off of 1 XFX GeForce 8600GT Graphics Card (1 @ VGA Out, 1 @ DVI Out (w/adapter)), running on a GigaByte Motherboard.
I have been in contact with my MB, Graphics and Display Manufacturers, regarding 'Drivers', et al, and there has been alot of head scratching, but no resolution to my problem.
Whether I have EITHER of each Monitor hooked to either Output on the Card (1 at a time), or BOTH hooked to EITHER Output at the same time (2 at a time), if I go above 800x600 res on either Monitor, that Monitors Image moves DOWN & RIGHT, rather severly, and using the On-Screen Adjustment, does NOT help.
I have been in contact with my MB, Graphics and Display Manufacturers, regarding 'Drivers', et al, and there has been alot of head scratching, but no resolution to my problem.
Whether I have EITHER of each Monitor hooked to either Output on the Card (1 at a time), or BOTH hooked to EITHER Output at the same time (2 at a time), if I go above 800x600 res on either Monitor, that Monitors Image moves DOWN & RIGHT, rather severly, and using the On-Screen Adjustment, does NOT help.
Computers & Internet - ViewSonic - Optiquest - OptiQuest Monitor
Answers & Comments
Hi and welcome to FixYa,
Initially, what motherboard pls? And has it been flashed to the latest BIOS?
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.
You could connect both monitors at a time but after installing the card drivers. the driver installation will enable you to achieve high resolution as well.
Possibly a problem with the monitors, have you tried other monitors with this? other than that a fault in the card or windows video positions are messed up, try adjusting the nvidia .. screen position.
its possibly a driver problem. Try adjusting the screen position.