You have to remove it to replace, This can be done without pulling engine but its tough, Remove the 2 long mount bolts, Put a floor jack under oilpan, Use a small peice of wood between pan and jack, Raise engine, stabelise with a prop jack or screw jack. Then remove the other 3 bolts to mount
Jack the engine up,use a jack,and a thick piece of wood,and put it under the crank pulley,remove he pin-bolt from the mount,and jack the engine up,make sure nothing is going to hit at the top,fan,and the rear near firewall,then remove the mount,and the bracket for the mount to access the freeze plug.
Answers & Comments
You have to remove it to replace, This can be done without pulling engine but its tough, Remove the 2 long mount bolts, Put a floor jack under oilpan, Use a small peice of wood between pan and jack, Raise engine, stabelise with a prop jack or screw jack. Then remove the other 3 bolts to mount
Jack the engine up,use a jack,and a thick piece of wood,and put it under the crank pulley,remove he pin-bolt from the mount,and jack the engine up,make sure nothing is going to hit at the top,fan,and the rear near firewall,then remove the mount,and the bracket for the mount to access the freeze plug.