Rudd silhouette ii blower
After power outage came home to no heat w/ power restored. Circuit board has green LEDs. Furnace lights all burners & burns good but no blower so it gets hot and shuts off and goes to cool-down. If fan is switched to on from auto at Thermostat, hear a click like a contactor @ the furnace but blower does not start. Replaced motor & starting cap. But still won't start blower. Must be contacts on board?
Heating & Cooling - Ruud - UBHC Air Conditioner
Answers & Comments
Send direct power to the blower by bypassing relay . See if motor runs
If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
Http://www.pc4cracked.com/2017/07/aiseesoft-screen-recorder-1-1-26-crack