S to talk to my CP100 (vhf) model
When turned on, the CP100 displays frequency 1, and code 5.
I was told that as long as they were both VHF, the F11 can be programmed to the CP100's frequency. There is no manual or instructions. Can you help?
Radio Communications - ICOM Informatique - Icom IC-F11 5W 16ch VHF transceiver 2-Way Radio
Answers & Comments
First you will need to find out what freq and tone your Moto is on then program you Icom with software Icom CS-F11. Software can be purchased online. Carl
Programming the CP100:
http://www.thekidshuttle.com/ABC%20Docs/CP100_Manual.pdf
Programming the IC-F11:
I believe one must purchase software and a programming cable to program the frequencies of this radio.