Same as previous poster. We have a 3 yr old Blanco faucet #157090ST with pull out sprayer. Had recent well problems (replaced pump), and then a temporary sediment issue. Pulled out all filters in sprayer and cleaned, cleaned spray ports, no clogs. Works fine, but water pressure is half of what is used to be. All other facuets, hoses in house are fine, with good pressure. Wife is ready to yank it out! Help
Hi, The only way to try and get it back is to unhook the hoses from the water feed lines....then unhook the sprayer from the hose... Now open the faucet wide open in the warm position... Then using a blow gun on an air compressor tank, blow air backwards through the valve body of the faucet... This should blow any residual dirt back and out through the hoses... Then reassemble everything and you should be back in business!!
Answers & Comments
Hi,
The only way to try and get it back is to unhook the hoses from the water feed lines....then unhook the sprayer from the hose...
Now open the faucet wide open in the warm position...
Then using a blow gun on an air compressor tank, blow air backwards through the valve body of the faucet...
This should blow any residual dirt back and out through the hoses...
Then reassemble everything and you should be back in business!!
heatman101