Found the two 1000uf 10V capacitors that were bulged out on the power supply board located inside the main control box, replaced them with 1000uf 16v capacitors from Allied Electronics at $3.00. Took the parts to an electronics repair shop and had them replaced, these type of capacitors have a +/- pins so ensure if your soldering these yorself get the polarity correct, and don't replace them with 10v again thats probably why some are only lasting another week or two.
Answers & Comments
Found the two 1000uf 10V capacitors that were bulged out on the power supply board located inside the main control box, replaced them with 1000uf 16v capacitors from Allied Electronics at $3.00. Took the parts to an electronics repair shop and had them replaced, these type of capacitors have a +/- pins so ensure if your soldering these yorself get the polarity correct, and don't replace them with 10v again thats probably why some are only lasting another week or two.