Sanyo PD58D34 TV Every 20 seconds shows "Program change by cable co" then changes my chan to 24. Not a cable problem. Nothing loose or bulging inside. Do I need a new tuner? Which part is tuner?
Televison & Video - Sanyo
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Do a reset [Factory reset] tho this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.