Frame bolts, I run to around 120 +or -. Ball and tierod, around 75( do not loosen, keep tightening them to get to cotter pin in). the sway bar link, I run it down till the rudder is between 1/2 and 3/4 inch thick.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Frame bolts, I run to around 120 +or -. Ball and tierod, around 75( do not loosen, keep tightening them to get to cotter pin in). the sway bar link, I run it down till the rudder is between 1/2 and 3/4 inch thick.