The problem can be bad caps (bulging top) which is more likely, or bad backlight inverter circuits. Check to see if you do have 12vdc or no bad caps, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
The problem can be bad caps (bulging top) which is more likely, or bad backlight inverter circuits. Check to see if you do have 12vdc or no bad caps, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums