Are you in UK using 220V AC or in USA using 120V AC?
Service & Spare Parts
If after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Service & Spare Parts If you require a service engineer or wish to purchase spare parts, contact your local AEG Service Force Centre, by telephoning: Help us to help you Please determine your type of enquiry before telephoning. When you contact us we need to know. 1. Your name, address and post code. 2. Your telephone number. 3. Clear and concise details of the fault. - What is the fault? - When does the fault occur? 4. The model, production number and product identification number. 5. Date of purchase. This information can be found on the rating plate, so you have these numbers to hand we recommend you write them below. Customer Care For general enquiries regarding your AEG appliance, or further information on AEG products please contact our customer care department by letter or telephone at the address below or visit our website at
www.aeg.co.uk.
Customer Care Department AEG Domestic Appliances 55-77 High Street, Slough, Berkshire SL1 1DZ
Tel: 08705 350350*
*Calls to this number may be recorded for training purposes. 0870 5 929 929
===============
Here is the FULL User Manual Link

Vincent G

There are only 4 wires inside power cord.

If it's thotal of 3 wires then please email me ASAP.

It will be easy to back track.


Inspect the cord at the machine end.

If the cord is cut badly then do your best to pull the out most plastic back and ID the THREE color of the wire.

It will be

Black is hot

Red is Hot

White in Neutral

Bare is grounding


Take a digital photo of the dryer cord and bring it to a hardware store to match it up.


Please observe electricity safety and wear protective gloves during the installation. There are only 4 wires inside power cord. If it's thotal of 3 wires then please email me ASAP. It will be easy to back track. Inspect the cord at the machine end. If the cord is cut badly then do your best to pull the out most plastic back and ID the THREE color of the wire. It will be Black is hot Red is Hot White in Neutral Bare is grounding Take a digital photo of the dryer cord and bring it to a hardware store to match it up. Please observe electricity safety and wear protective gloves during the installation.