Servis m9503 washer dryer keeps filling while washing.It just wont stop filling with water. Have changed the pressure switch,cleaned the pressure chamber,pressure switch pipe is clear and the drain hose in the right height. Am bemused by this fault
The problem can be found if you can check if the pressure switch contact is working and sends the signal back to the controller unit. If not there is fault in the wiring as you have replaced the switch. Also if the switch works then the controller unit is at fault and is not reacting to the input from the water level sensor.
Answers & Comments
The problem can be found if you can check if the pressure switch contact is working and sends the signal back to the controller unit. If not there is fault in the wiring as you have replaced the switch.
Also if the switch works then the controller unit is at fault and is not reacting to the input from the water level sensor.